Definition: BIM (Building Information Modeling) is a work method in which teams plan, build and operate buildings and facilities over their full life cycle with one shared digital model. The model connects 3D geometry with information such as type, manufacturer, performance or maintenance interval. All participants work on the same data.
English: Building Information Modeling (BIM)
German: Bauwerksdatenmodellierung
How It Works
A BIM model consists of objects, not lines. A wall knows that it is a wall. A machine carries its dimensions, connection values and weight as attributes. Two standards set the framework:
- ISO 19650: controls information management, that is, who supplies which information, when, and in which form. The concept Level of Information Need (ISO 7817-1) describes how detailed the geometry and data must be.
- IFC (Industry Foundation Classes): the open, vendor-neutral exchange format from buildingSMART, standardized as ISO 16739-1. The current version, IFC 4.3, was published as an ISO standard in 2024.
In the open approach (Open BIM), each trade makes its discipline model in its own software and exchanges it through IFC. A coordination model combines all models and shows collisions, for example between a machine and a ventilation duct.
Importance in Mechanical Engineering
- BIM objects for factory planning: Planners of plants and halls ask more and more often for BIM-ready manufacturer data. For this, machine builders supply simplified models as IFC, with the envelope, footprint, maintenance areas and connection points (power, compressed air, water).
- Simplification instead of design data: The full CAD model is too heavy and reveals know-how. As in CAD to 3D conversion, you reduce it, but here the focus is on attributes, not on appearance.
- Sales and project planning: A BIM object in the quote shows the customer early how the machine fits into the hall. This shortens coordination.
- Operation and digital twin: After commissioning, you can connect the BIM model with operating data and use it as the basis for a digital twin of the factory.
Frequently Asked Questions (FAQ)
Is BIM a software?
No. BIM is a method. Teams apply it with different programs that exchange data through IFC.
How detailed must the BIM object of a machine be?
As detailed as the client specifies in its information requirements. For layout planning, the envelope, footprint, weight and connections are usually sufficient.
Can you show BIM models in AR or VR?
Yes, after you prepare them for real-time display. This lets you walk through halls in virtual reality before they are built.
